VIDEO: How Does Sustainability Apply To Brake Pads

VIDEO: How Does Sustainability Apply To Brake Pads

The carbon footprint starts with the steel for the backing plate. This video is sponsored by NRS Brakes.

We hear a lot about carbon footprints and sustainability. But how does this apply to brake pads?

Let’s first look at the manufacturing process.

The carbon footprint starts with the steel for the backing plate. If a manufacturer starts with low-grade steel covered in mill scale, also known as black steel, they will have to clean the surface after the pad is stamped.

Shot blasting machines need energy and additional materials. This increases the carbon footprint. To remove oil and debris after shot blasting, it requires chemicals and potentially toxic chemicals.

If a brake pad manufacturer uses resins or glues to secure the friction material to the backing plate, they will need large ovens to cure the resins and glue. Ovens need electricity or gas to operate; this increases the carbon footprint further.

If the brake pad is painted, the painting fumes must be contained and rendered inert. This again requires energy for the equipment and creates additional waste streams from a factory. Even if the pad is powder-coated, ovens are still needed to cure the finish.

Is there was a better way? The best way to reduce the environmental footprint is to start with better ingredients. Starting with high-quality steel with no mill scale or embedded iron oxides eliminates the need to shot blast the backing plate, thus decreasing the energy and waste required to make the backing plate.

Some manufacturers have even eliminated the glue required to secure the friction material by using mechanical attachment technology. These small hooks on the backing plate mechanically grip the friction material. No glue means no fumes or the long periods in a curing oven for the brake pad. This is an environmental win-win.

Mechanical attachment technology also reduces the brake pad’s carbon footprint in the field by reducing delamination and premature replacement.

Some brake pad manufacturers are ditching the paint for galvanization. Galvanization coats the pad with a zinc alloy in a hot bath. The chemicals used for galvanization are far less toxic than paint and do not off-gas or need to be cured. Another advantage is that the galvanized coating is applied to the area where the friction material is attached.

Once a brake pad set has been shipped and sold, the carbon footprint can expand even further. If one brake pad in a set of four has delamination due to corrosion, all the brake pads are going to need replacement sooner than anticipated. This means another set of brake pads needs to be manufactured and shipped to a shop, and the carbon footprint and environmental impact of the brake pads only grows larger.

If a shop chooses to install a brake pad that uses better steel, galvanization and mechanical attachment, the carbon footprint shrinks not only at the manufacturing level, but on the roads. This video is sponsored by NRS Brakes.

You May Also Like

Not All Coolants Are Equal – Or Appropriate

Engines have diverse cooling needs. This video is part of the Group Training Academy.

It may be hard to believe, but antifreeze has been around long before the automobile. In the mid-19th century, it was used in dynamite.  Early engine designers tried other means of cooling before antifreeze gained a foothold.  It came to prominence during World War I when it was used in tanks and vehicles to prevent them from freezing in the battlefield.

Tool Time Podcast: SATA USA

Learn about spray gun technology in this episode from TechShop.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

How Important is Regenerative Braking For EVs?

Regenerative braking helps to increase the range of an EV by up to 20%.

Other Posts

The Future of MEMA with Bill Long

MEMA looks to the future as it celebrates 120 years making a big impact.

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

BEV Brake Service Tips

Andrew Markel shares EV service tips from the BendPak EV Garage.

Get to Know Performance Ride Technology

PRT is a global OE supplier with more than 5,000 products available in the United States.